Now the improvement of quality of life makes people more enjoy the bathing
life. Whether it is from the decoration or details of Glass Shower Enclosure,
everyone will pay special attention to the pursuit of perfection. Take the small
detail of the shower room water barrier, how to install it is beautiful and
practical, what is the width of the shower room water barrier? What is the size
of the water retaining strip in the bathroom shower room? It is something that
everyone is more concerned about. The Shower Enclosure Manufacturer will address
this issue below and briefly analyze the width, thickness and size of the water
retaining strip in the shower room.
Shower Enclosure With Pivot Door
01 Width of shower bar
What should be the width of the shower room water-repellent bar? The common natural stone shower room water-repellent bar size generally has three widths, namely 3 cm, 5 cm and 6 cm.
Most shower rooms currently use 5 cm. Shower room accessories such as water barriers generally have finished products in the place where the stone is processed, and the price is not very expensive. The specific depends on the pattern and size of the shower room.
02 Thickness of the shower bar
What should the thickness of the water-retaining bar in the shower room be? The thickness of the water-retaining bar is also the height. The water-retaining bar we usually use has two sizes, 1 cm and 1.8 cm, respectively, and the more common one is 1.8 cm.
In the market, the size of the custom shower room water barrier is generally 60 mm wide and 40 mm high. In fact, the height is not too high, as long as the water can be blocked. If the accumulated water is too high, it will seep out of the shower room water barrier. That is not a problem with the water-retaining strip, it may be blocked by the floor drain of the shower room.
03 The size of the shower bar
The specific size of the water barrier of the shower room should match the size of the shower room. In addition, we need to consider the shower room size and faucet, spray head, shower, circuit, etc. Due to the emergence of non-standard shower rooms, the sizes of the shower rooms are different. Before the indoor installation, the drawings must be designed and the size of the shower room's water retaining bar must be calculated according to the actual situation. The water retaining bar can be pre-buried before installation. After a long time, the water will not seep out. Of course, you can not bury it and seal it with glue to keep out the water, but it will not be sealed after aging for a long time, so you need to pay attention to the size and installation method when installing.
Our company also has Shower Enclosure With Pivot Door on sale, please contact us.